APD 17 A

Aksa power generation system, providing optimum performance, and reliability, for stationary standby, prime power, and continuous duty applications. All generator sets are factory build, and production tested.

  TS ISO 8528

  TS ISO 9001-2008

  CE

  SZUTEST

  2000/14/EC

- Water cooled, Diesel engine 
- Radiator with mechanical fan 
- Protective grille for rotating and hot parts 
- Electric starter and charge alternator 
- Starting battery (with lead acid) including rack and cables 
- Engine coolant heater 
- Base frame design incorporates an integral fuel tank and anti-vibration isolators 
- Flexible fuel connection hoses 
- Single bearing, class H alternator 
- Industrial exhaust silencer and steel bellows supplied separately(for open sets) 
- Static battery charger 
- Manual for application and installation

• Remote Radiator Cooling
• Fuel-Water Seperator Filter

• Anti-Condensation Heater
• Main line circuit breaker

• Charge Ammeter

• Three Pole Contactor
• Four Pole Contactor
• Three or four pole motor operated circuit breaker

• Main Fuel Tank
• Automatic or manual fuel filling system
• Manual oil drain pump
• Enclosure: weater protective or sound attenuated
• Trailer
• Tool kit for maintenance

● DSE, model 6120 Auto Mains Failure control module.
● Battery charger input 198-264 volt, output 27,6 V 5 A (24 V) or 13,8 Volt 5A (12V)
● Emergency stop push button and fuses for control circuits.

● Components installed in sheet steel enclosure. Phosphate chemical, pre-coating of steel provides corrosion resistant surface. Polyester composite powder topcoat forms high gloss and extremely durable finish. Lockable and hinged panel door provides easy access to components.

Control panel is mounted on baseframe with steel stand. Located at the right side of the generator set (When you look at the Gen.Set. from Alternator)

The DSE 6120 module has been designed to monitor generator frequency, volt, current, engine oil pressure, coolant temperature running hours and battery volts.
Module monitors the mains supply and switch over to the generator when the mains power fails.
The DSE6120 also indicates operational status and fault conditions, Automatically shutting down the Gen. Set and giving true first up fault condition of Gen. Set failure.The LCD display indicates the fault.

Стандартные функции
● Microprocessor controlled.
● LCD display makes information easy to read.
● Automatically transfers between mains (utilty) and generator power.
● Manual programming on front panel.
● User-friendly set-up and button layout.
● Remote start.
● Event logging (50) showing date and time.
● Controls: Stop/Reset, Manual, Auto, Test, Start, buttons. An additional push button next to the LCD display is used to scroll through the modules' metering displays.

Измерительные приборы
ENGINE
● Engine speed.
● Oil pressure.
● Coolant temperature.
● Run time.
● Battery volts.
● Configurable timing.

GENERATOR
● Voltage (L-L, L-N).
● Current (L1-L2-L3).
● Frequency.
● Gen. Set ready.
● Gen. Set enabled.

MAINS
● Mains ready.
● Mains enabled.

Схема защиты
WARNING 
● Charge failure. 
● Battery Low/High voltage. 
● Fail to stop. 
● Low /High generator voltage. 
● Under /Over generator frequency. 
● Over /Under speed. 
● Low oil pressure. 
● High coolant temperature. 

SHUT DOWNS 
● Fail to start.
● Emergency stop. 
● Low oil pressure. 
● High coolant temperature. 
● Over /Under speed. 
● Under/over generator frequency. 
● Under/over generator voltage. 
● Oil pressure sensor open. 
● Coolant temperature sensor open. 

ELECTRICAL TRIP 
● Generator over current.

Опционные особенности
● Flexible sensor can be controlled with temperature, pressure, percentage (warning/shutdown/electrical trip)
● Local setting parameters and monitoring from PC to control module with USB connection (max 6 mt).

Стандарты
● Elecrical Safety / EMC compatibility
● BS EN 60950 Electrical business equipment.
● BS EN 61000-6-2 EMC immunity standard.
● BS EN 61000-6-4 EMC emission standard.

● Battery charger is manufactured with switching-mode and SMD technology and ıt has high efficiency.
● Battery charger models' output V-I characteristic is very close to square and output is 5 amper, 13,8 V for 12 volt and 27,6 V for 24 V . Input 198 - 264 volt AC.
● The charger is fitted with a protection diode across the output.
● Connect charge fail relay coil between positive output and CF output.
● They are equipped with RFI filter to reduce electrical noise radiated from the device.
● Galvanically isolated input and output typically 4kV for high reliability.